Maple-systems Windows Embedded CE 6.0 Pro Edition Manuale Utente Scaricare il pdf (Pagina 12)

1010-1017 Rev. 00 12

Ethernet

To connect your OMI to your computer via the10/100 Base-T Ethernet

port requires a standard Ethernet crossover cable (Maple P/N 7431-

0104). If you use a switch or router between the computer and the OMI,

use a straight-thru cable (Maple P/N 7431-0103).

Once a connection is made, you will need to install a data

synchronization program use as Microsoft's ActiveSync onto your

computer. ActiveSync provides the ability to manually transfer files to

the OMI5000 or download application software. ActiveSync is available

from Microsoft's support website for mobile applications.

Maintenance

Figure 6: DIP switch positions (power must be cycled on the OMI to enable the DIP

switch mode).

SW1

SW2

SW3

SW4

Mode

OFF

Touchscreen Calibration mode

OFF

Reserved

OFF

Force into Boot Loader mode

OFF

Reserved

OFF

Normal operation

Touchscreen Calibration mode: This mode allows you to recalibrate

the touchscreen.

Boot Loader mode: This mode forces the OMI to not execute the

project. This mode is used when replacing or reinstalling the operating

system. Contact Maple Systems for more information.

Normal Operation: All DIP switches must be in the OFF position for

normal operation.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Nessun commento

Maple-systems Windows Embedded CE 6.0 Pro Edition Manuale Utente Pagina 12